PCV breather system

oh poo! I have my car in many, many pieces and I have absolutely no idea how to get it back together. :hissyfit: It looked so bloody simple in the guides! Ahem, any advice?

I didn't manage to get the fuel rail unconnected properly? So I can't get it resting upside down, I removed one clamp but it still seems stuck in postion, being held by the rigid pipes going down the back of the engine. so anyway, I got the injectors and inlet off, but the injectors didn't come off in a clean row like in the picture, I pulled them out one by one.... I have all the injectors but only 2 blue seals?

Ok, so I have removed the bracket that was around the area of the yellow arrow, but the fuel pipes are still connected around the red arrows.... Where abouts is the second bracket? Should I have disconnected the pipes from the actual rail (near red arrow at front of the picture?) if so, how? lol dear me, I think I might have to pay someone to put this back together again... As you can tell, I'm a bit stressed out, not had much sleep worrying bout my poor car! 5:44am!

Yep, you need to remove the fuel pipe from the red arrow. You can get the inlet off without removing the fuel rail but you need a good socket set with all the bits. Either way that fuel pipe needs to be taken off. It's the big nut you need to wind off, I think it's a 17mm